angle_style class2 command

Accelerator Variants: class2/kk, class2/omp

angle_style class2/p6 command

Syntax

angle_style class2

Examples

angle_style class2
angle_coeff * 75.0
angle_coeff 1 bb 10.5872 1.0119 1.5228
angle_coeff * ba 3.6551 24.895 1.0119 1.5228

Description

The class2 angle style uses the potential

\[\begin{split}E & = E_a + E_{bb} + E_{ba} \\ E_a & = K_2 (\theta - \theta_0)^2 + K_3 (\theta - \theta_0)^3 + K_4(\theta - \theta_0)^4 \\ E_{bb} & = M (r_{ij} - r_1) (r_{jk} - r_2) \\ E_{ba} & = N_1 (r_{ij} - r_1) (\theta - \theta_0) + N_2(r_{jk} - r_2)(\theta - \theta_0)\end{split}\]

where \(E_a\) is the angle term, \(E_{bb}\) is a bond-bond term, and \(E_{ba}\) is a bond-angle term. \(\theta_0\) is the equilibrium angle and \(r_1\) and \(r_2\) are the equilibrium bond lengths.

See (Sun) for a description of the COMPASS class2 force field.

Coefficients for the \(E_a\), \(E_{bb}\), and \(E_{ba}\) formulas must be defined for each angle type via the angle_coeff command as in the example above, or in the data file or restart files read by the read_data or read_restart commands.

These are the 4 coefficients for the \(E_a\) formula:

  • \(\theta_0\) (degrees)

  • \(K_2\) (energy)

  • \(K_3\) (energy)

  • \(K_4\) (energy)

\(\theta_0\) is specified in degrees, but LAMMPS converts it to radians internally; hence the various \(K\) are effectively energy per radian^2 or radian^3 or radian^4.

For the \(E_{bb}\) formula, each line in a angle_coeff command in the input script lists 4 coefficients, the first of which is “bb” to indicate they are BondBond coefficients. In a data file, these coefficients should be listed under a “BondBond Coeffs” heading and you must leave out the “bb”, i.e. only list 3 coefficients after the angle type.

  • bb

  • \(M\) (energy/distance^2)

  • \(r_1\) (distance)

  • \(r_2\) (distance)

For the \(E_{ba}\) formula, each line in a angle_coeff command in the input script lists 5 coefficients, the first of which is “ba” to indicate they are BondAngle coefficients. In a data file, these coefficients should be listed under a “BondAngle Coeffs” heading and you must leave out the “ba”, i.e. only list 4 coefficients after the angle type.

  • ba

  • \(N_1\) (energy/distance^2)

  • \(N_2\) (energy/distance^2)

  • \(r_1\) (distance)

  • \(r_2\) (distance)

The \(\theta_0\) value in the \(E_{ba}\) formula is not specified, since it is the same value from the \(E_a\) formula.


Styles with a gpu, intel, kk, omp, or opt suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed on the Speed packages doc page. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues.

These accelerated styles are part of the GPU, INTEL, KOKKOS, OPENMP and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the Build package page for more info.

You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the -suffix command-line switch when you invoke LAMMPS, or you can use the suffix command in your input script.

See the Speed packages page for more instructions on how to use the accelerated styles effectively.


The class2/p6 angle style uses the class2 potential expanded to sixth order:

\[E_{a} = K_2\left(\theta - \theta_0\right)^2 + K_3\left(\theta - \theta_0\right)^3 + K_4\left(\theta - \theta_0\right)^4 + K_5\left(\theta - \theta_0\right)^5 + K_6\left(\theta - \theta_0\right)^6\]

In this expanded term 6 coefficients for the \(E_a\) formula need to be set:

  • \(\theta_0\) (degrees)

  • \(K_2\) (energy)

  • \(K_3\) (energy)

  • \(K_4\) (energy)

  • \(K_5\) (energy)

  • \(K_6\) (energy)

\(\theta_0\) is specified in degrees, but LAMMPS converts it to radians internally; hence the various \(K\) are effectively energy per radian^2 or radian^3 or radian^4 or radian^5 or radian^6.

The bond-bond and bond-angle terms remain unchanged.


Restrictions

This angle style can only be used if LAMMPS was built with the CLASS2 package. For the class2/p6 style LAMMPS needs to be built with the MOFFF package. See the Build package doc page for more info.

Default

none


(Sun) Sun, J Phys Chem B 102, 7338-7364 (1998).