bond_style fene/expand command

Accelerator Variants: fene/expand/omp

Syntax

bond_style fene/expand

Examples

bond_style fene/expand
bond_coeff 1 30.0 1.5 1.0 1.0 0.5

Description

The fene/expand bond style uses the potential

\[E = -0.5 K R_0^2 \ln \left[1 -\left( \frac{\left(r - \Delta\right)}{R_0}\right)^2 \right] + 4 \epsilon \left[ \left(\frac{\sigma}{\left(r - \Delta\right)}\right)^{12} - \left(\frac{\sigma}{\left(r - \Delta\right)}\right)^6 \right] + \epsilon\]

to define a finite extensible nonlinear elastic (FENE) potential (Kremer), used for bead-spring polymer models. The first term is attractive, the second Lennard-Jones term is repulsive.

The fene/expand bond style is similar to fene except that an extra shift factor of \(\Delta\) (positive or negative) is added to \(r\) to effectively change the bead size of the bonded atoms. The first term now extends to \(R_0 + \Delta\) and the second term is cutoff at \(2^\frac{1}{6} \sigma + \Delta\).

The following coefficients must be defined for each bond type via the bond_coeff command as in the example above, or in the data file or restart files read by the read_data or read_restart commands:

  • \(K\) (energy/distance^2)

  • \(R_0\) (distance)

  • \(\epsilon\) (energy)

  • \(\sigma\) (distance)

  • \(\Delta\) (distance)


Styles with a gpu, intel, kk, omp, or opt suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed on the Speed packages doc page. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues.

These accelerated styles are part of the GPU, INTEL, KOKKOS, OPENMP and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the Build package page for more info.

You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the -suffix command-line switch when you invoke LAMMPS, or you can use the suffix command in your input script.

See the Speed packages page for more instructions on how to use the accelerated styles effectively.


Restrictions

This bond style can only be used if LAMMPS was built with the MOLECULE package. See the Build package page for more info.

You typically should specify special_bonds fene or special_bonds lj/coul 0 1 1 to use this bond style. LAMMPS will issue a warning it that’s not the case.

Default

none


(Kremer) Kremer, Grest, J Chem Phys, 92, 5057 (1990).