compute heat/flux command¶
Syntax¶
compute ID group-ID heat/flux ke-ID pe-ID stress-ID
ID, group-ID are documented in compute command
heat/flux = style name of this compute command
ke-ID = ID of a compute that calculates per-atom kinetic energy
pe-ID = ID of a compute that calculates per-atom potential energy
stress-ID = ID of a compute that calculates per-atom stress
Examples¶
compute myFlux all heat/flux myKE myPE myStress
Description¶
Define a computation that calculates the heat flux vector based on contributions from atoms in the specified group. This can be used by itself to measure the heat flux through a set of atoms (e.g. a region between two thermostatted reservoirs held at different temperatures), or to calculate a thermal conductivity using the equilibrium Green-Kubo formalism.
For other non-equilibrium ways to compute a thermal conductivity, see the Howto kappa doc page.. These include use of the fix thermal/conductivity command for the Muller-Plathe method. Or the fix heat command which can add or subtract heat from groups of atoms.
The compute takes three arguments which are IDs of other computes. One calculates per-atom kinetic energy (ke-ID), one calculates per-atom potential energy (pe-ID), and the third calculates per-atom stress (stress-ID).
Note
These other computes should provide values for all the atoms in the group this compute specifies. That means the other computes could use the same group as this compute, or they can just use group “all” (or any group whose atoms are superset of the atoms in this compute’s group). LAMMPS does not check for this.
In case of two-body interactions, the heat flux is defined as:
\(e_i\) in the first term of the equation is the per-atom energy (potential and kinetic). This is calculated by the computes ke-ID and pe-ID. \(\mathbf{S}_i\) in the second term is the per-atom stress tensor calculated by the compute stress-ID. See compute stress/atom and compute centroid/stress/atom for possible definitions of atomic stress \(\mathbf{S}_i\) in the case of bonded and many-body interactions. The tensor multiplies \(\mathbf{v}_i\) as a 3x3 matrix-vector multiply to yield a vector. Note that as discussed below, the 1/\({V}\) scaling factor in the equation for \(\mathbf{J}\) is NOT included in the calculation performed by these computes; you need to add it for a volume appropriate to the atoms included in the calculation.
Note
The compute pe/atom and compute stress/atom commands have options for which terms to include in their calculation (pair, bond, etc). The heat flux calculation will thus include exactly the same terms. Normally you should use compute stress/atom virial or compute centroid/stress/atom virial so as not to include a kinetic energy term in the heat flux.
Warning
The compute heat/flux has been reported to produce unphysical values for angle, dihedral and improper contributions when used with compute stress/atom, as discussed in (Surblys) and (Boone). You are strongly advised to use compute centroid/stress/atom, which has been implemented specifically for such cases.
The Green-Kubo formulas relate the ensemble average of the auto-correlation of the heat flux \(\mathbf{J}\) to the thermal conductivity \(\kappa\):
The heat flux can be output every so many timesteps (e.g. via the thermo_style custom command). Then as a post-processing operation, an auto-correlation can be performed, its integral estimated, and the Green-Kubo formula above evaluated.
The fix ave/correlate command can calculate the auto-correlation. The trap() function in the variable command can calculate the integral.
An example LAMMPS input script for solid Ar is appended below. The result should be: average conductivity ~0.29 in W/mK.
Output info¶
This compute calculates a global vector of length 6. The first 3 components are the \(x\), \(y\), \(z\) components of the full heat flux vector, i.e. (\(J_x\), \(J_y\), \(J_z\)). The next 3 components are the \(x\), \(y\), \(z\) components of just the convective portion of the flux, i.e. the first term in the equation for \(\mathbf{J}\). Each component can be accessed by indices 1-6. These values can be used by any command that uses global vector values from a compute as input. See the Howto output page for an overview of LAMMPS output options.
The vector values calculated by this compute are “extensive”, meaning they scale with the number of atoms in the simulation. They can be divided by the appropriate volume to get a flux, which would then be an “intensive” value, meaning independent of the number of atoms in the simulation. Note that if the compute is “all”, then the appropriate volume to divide by is the simulation box volume. However, if a sub-group is used, it should be the volume containing those atoms.
The vector values will be in energy*velocity units. Once divided by a volume the units will be that of flux, namely energy/area/time units
Restrictions¶
none
Default¶
none
# Sample LAMMPS input script for thermal conductivity of solid Ar
units real
variable T equal 70
variable V equal vol
variable dt equal 4.0
variable p equal 200 # correlation length
variable s equal 10 # sample interval
variable d equal $p*$s # dump interval
# convert from LAMMPS real units to SI
variable kB equal 1.3806504e-23 # [J/K] Boltzmann
variable kCal2J equal 4186.0/6.02214e23
variable A2m equal 1.0e-10
variable fs2s equal 1.0e-15
variable convert equal ${kCal2J}*${kCal2J}/${fs2s}/${A2m}
# setup problem
dimension 3
boundary p p p
lattice fcc 5.376 orient x 1 0 0 orient y 0 1 0 orient z 0 0 1
region box block 0 4 0 4 0 4
create_box 1 box
create_atoms 1 box
mass 1 39.948
pair_style lj/cut 13.0
pair_coeff * * 0.2381 3.405
timestep ${dt}
thermo $d
# equilibration and thermalization
velocity all create $T 102486 mom yes rot yes dist gaussian
fix NVT all nvt temp $T $T 10 drag 0.2
run 8000
# thermal conductivity calculation, switch to NVE if desired
#unfix NVT
#fix NVE all nve
reset_timestep 0
compute myKE all ke/atom
compute myPE all pe/atom
compute myStress all stress/atom NULL virial
compute flux all heat/flux myKE myPE myStress
variable Jx equal c_flux[1]/vol
variable Jy equal c_flux[2]/vol
variable Jz equal c_flux[3]/vol
fix JJ all ave/correlate $s $p $d &
c_flux[1] c_flux[2] c_flux[3] type auto file J0Jt.dat ave running
variable scale equal ${convert}/${kB}/$T/$T/$V*$s*${dt}
variable k11 equal trap(f_JJ[3])*${scale}
variable k22 equal trap(f_JJ[4])*${scale}
variable k33 equal trap(f_JJ[5])*${scale}
thermo_style custom step temp v_Jx v_Jy v_Jz v_k11 v_k22 v_k33
run 100000
variable k equal (v_k11+v_k22+v_k33)/3.0
variable ndens equal count(all)/vol
print "average conductivity: $k[W/mK] @ $T K, ${ndens} /A\^3"
(Surblys) Surblys, Matsubara, Kikugawa, Ohara, Phys Rev E, 99, 051301(R) (2019).
(Boone) Boone, Babaei, Wilmer, J Chem Theory Comput, 15, 5579–5587 (2019).