pair_style lj/cut command

Accelerator Variants: lj/cut/gpu, lj/cut/intel, lj/cut/kk, lj/cut/opt, lj/cut/omp

Syntax

pair_style style args

  • style = lj/cut

  • args = list of arguments for a particular style

lj/cut args = cutoff
  cutoff = global cutoff for Lennard Jones interactions (distance units)

Examples

pair_style lj/cut 2.5
pair_coeff * * 1 1
pair_coeff 1 1 1 1.1 2.8

Description

The lj/cut styles compute the standard 12/6 Lennard-Jones potential, given by

\[E = 4 \epsilon \left[ \left(\frac{\sigma}{r}\right)^{12} - \left(\frac{\sigma}{r}\right)^6 \right] \qquad r < r_c\]

\(r_c\) is the cutoff.

See the lj/cut/coul styles to add a Coulombic pairwise interaction and the lj/cut/tip4p styles to add the TIP4P water model.

Coefficients

The following coefficients must be defined for each pair of atoms types via the pair_coeff command as in the examples above, or in the data file or restart files read by the read_data or read_restart commands, or by mixing as described below:

  • \(\epsilon\) (energy units)

  • \(\sigma\) (distance units)

  • LJ cutoff (distance units)

Note that \(\sigma\) is defined in the LJ formula as the zero-crossing distance for the potential, not as the energy minimum at \(2^{\frac{1}{6}} \sigma\).

The last coefficient is optional. If not specified, the global LJ cutoff specified in the pair_style command are used.

A version of these styles with a soft core, lj/cut/soft, suitable for use in free energy calculations, is part of the FEP package and is documented with the pair_style */soft styles.

Styles with a gpu, intel, kk, omp, or opt suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed on the Speed packages doc page. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues.

These accelerated styles are part of the GPU, INTEL, KOKKOS, OPENMP and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the Build package page for more info.

You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the -suffix command-line switch when you invoke LAMMPS, or you can use the suffix command in your input script.

See the Speed packages page for more instructions on how to use the accelerated styles effectively.

Mixing, shift, table, tail correction, restart, rRESPA info

For atom type pairs I,J and I != J, the epsilon and sigma coefficients and cutoff distance for all of the lj/cut pair styles can be mixed. The default mix value is geometric. See the “pair_modify” command for details.

All of the lj/cut pair styles support the pair_modify shift option for the energy of the Lennard-Jones portion of the pair interaction.

All of the lj/cut pair styles support the pair_modify tail option for adding a long-range tail correction to the energy and pressure for the Lennard-Jones portion of the pair interaction.

All of the lj/cut pair styles write their information to binary restart files, so pair_style and pair_coeff commands do not need to be specified in an input script that reads a restart file.

The lj/cut pair styles support the use of the inner, middle, and outer keywords of the run_style respa command, meaning the pairwise forces can be partitioned by distance at different levels of the rRESPA hierarchy. The other styles only support the pair keyword of run_style respa. See the run_style command for details.

Default

none