`ovito.pipeline`¶

This module contains object types that are part of OVITO’s data pipeline system.

Pipelines:

Pipeline

Modifier (base class)

Data sources:

StaticSource

FileSource

PythonScriptSource

class ovito.pipeline.FileSource¶

This object type serves as a Pipeline.source and takes care of reading the input data for a Pipeline from an external file.

You normally do not need to create an instance of this class yourself; the import_file() function does it for you and wires the fully configured FileSource to the new Pipeline. However, if needed, the FileSource.load() method allows you to load a different input file later on and replace the input of the existing pipeline with a new dataset:

from ovito.io import import_file

# Create a new pipeline with a FileSource:
pipeline = import_file('input/first_file.dump')

# Get the data from the first file:
data1 = pipeline.compute()

# Use FileSource.load() method to replace the pipeline's input with a different file 
pipeline.source.load('input/second_file.dump')

# Now the pipeline gets its input data from the new file:
data2 = pipeline.compute()

Furthermore, you will encounter other FileSource objects in conjunction with certain modifiers that need secondary input data from a separate file. The CalculateDisplacementsModifier, for example, manages its own FileSource for loading reference particle positions from a separate input file. Another example is the LoadTrajectoryModifier, which employs its own separate FileSource instance to load the particle trajectories from disk and combine them with the topology data previously loaded by the main FileSource of the data pipeline.

Data access

The FileSource class provides two ways of accessing the data that is loaded from the external input file(s). For read-only access to the data, the FileSource.compute() method should be called. It loads the data of a specific frame from the input simulation trajectory and returns it as a new DataCollection object:

# This creates a new Pipeline with an attached FileSource.
pipeline = import_file('input/simulation.dump')

# Request data of animation frame 0 from the FileSource.
data = pipeline.source.compute(0)
print(data.particles.positions[...])

To modify or amend the DataCollection that was loaded by the FileSource, you should insert a user-defined modifier function into the pipeline. A typical use case is assigning the radii and names to particle types loaded from a simulation file that doesn’t contain named atom types:

pipeline = import_file('input/simulation.dump')

# User-defined modifier function that assigns names and radii to numeric atom types:
def setup_atom_types(frame, data):
    types = data.particles_.particle_types_
    types.type_by_id_(1).name = "Cu"
    types.type_by_id_(1).radius = 1.35
    types.type_by_id_(2).name = "Zr"
    types.type_by_id_(2).radius = 1.55

pipeline.modifiers.append(setup_atom_types)

compute(frame=None)¶

Requests data from this data source. The FileSource will load it from the external file if needed.

The optional frame parameter determines the frame to retrieve, which must be in the range 0 through (num_frames-1). If no frame number is specified, the current time slider position is used (will always be frame 0 for scripts not running in the context of an interactive OVITO session).

The FileSource uses a caching mechanism to keep the data for one or more frames in memory. Thus, invoking compute() repeatedly to retrieve the same frame will typically be very fast.

Parameters: frame (int) – The source frame to retrieve.
Returns: A new DataCollection containing the loaded data.

property data¶: This field provides access to the internal DataCollection, i.e. the master copy of the data loaded from the input file (at frame 0).

load(location, **params)¶

Sets a new input file, from which this data source will retrieve its data from.

The function accepts additional keyword arguments, which are forwarded to the format-specific file importer. For further information, please see the documentation of the import_file() function, which has the same function interface as this method.

Parameters: location (str) – The local file(s) or remote URL to load.

property num_frames¶: This read-only attribute reports the number of frames found in the input file or sequence of input files. The data for the individual frames can be obtained using the compute() method.

property source_path¶: This read-only attribute returns the path(s) or URL(s) of the file(s) where this FileSource retrieves its input data from. You can change the source path by calling load().

class ovito.pipeline.Modifier¶

This is the base class for all modifier types in OVITO. See the ovito.modifiers module for a list of concrete modifier types that can be inserted into a data Pipeline.

property enabled¶

Controls whether the modifier is applied to the data. Disabled modifiers are skipped during evaluation of a data pipeline.

Default: True

class ovito.pipeline.Pipeline¶

This class encapsulates a data pipeline, consisting of a data source and a chain of zero or more modifiers, which manipulate the data on the way through the pipeline.

Pipeline creation

Every pipeline has a data source, which loads or dynamically generates the input data entering the pipeline. This source is accessible through the Pipeline.source field and may be replaced with a different kind of source object if needed. For pipelines created by the import_file() function, the data source is automatically set to be a FileSource object, which loads the input data from the external file and feeds it into the pipeline. Another kind of data source is the StaticSource, which can be used if you want to programmatically specify the input data for the pipeline instead of loading it from a file.

The modifiers that are part of the pipeline are accessible through the Pipeline.modifiers field. This list is initially empty and you can populate it with the modifier types found in the ovito.modifiers module. Note that it is possible to employ the same Modifier instance in more than one pipeline. And it is okay to use the same data source object for several pipelines, letting them process the same input data.

Pipeline evaluation

Once the pipeline is set up, its computation results can be requested by calling compute(), which means that the input data will be loaded/generated by the source and all modifiers of the pipeline are applied to the data one after the other. The compute() method returns a new DataCollection storing the data objects produced by the pipeline. Under the hood, an automatic caching system ensures that unnecessary file accesses and computations are avoided. Repeatedly calling compute() will not trigger a recalculation of the pipeline’s results unless you alter the pipeline’s data source, the chain of modifiers, or a modifier’s parameters.

Usage example

The following code example shows how to create a new pipeline by importing an MD simulation file and inserting a SliceModifier to cut away some of the particles. Finally, the total number of remaining particles is printed.

from ovito.io import import_file
from ovito.modifiers import SliceModifier

# Import a simulation file. This creates a Pipeline object.
pipeline = import_file('input/simulation.dump')

# Insert a modifier that operates on the data:
pipeline.modifiers.append(SliceModifier(normal=(0,0,1), distance=0))

# Compute the effect of the slice modifier by evaluating the pipeline.
output = pipeline.compute()
print("Remaining particle count:", output.particles.count)

If you would like to access the unmodified input data of the pipeline, i.e. before it has been processed by any of the modifiers, you can call the FileSource.compute() method instead:

# Access the pipeline's input data provided by the FileSource:
input = pipeline.source.compute()
print("Input particle count:", input.particles.count)

Data visualization

If you intend to produce graphical renderings of a output data produced by a pipeline, you must make the pipeline part of the current three-dimensional scene by calling the Pipeline.add_to_scene() method.

Data export

To export the generated data of the pipeline to an output file, simply call the ovito.io.export_file() function with the pipeline.

add_to_scene()¶

Inserts the pipeline into the three-dimensional scene by appending it to the ovito.Scene.pipelines list. The visual representation of the pipeline’s output data will appear in rendered images and in the interactive viewports of the graphical OVITO program.

You can remove the pipeline from the scene again using remove_from_scene().

compute(frame=None)¶

Computes and returns the results of this data pipeline.

This method requests an evaluation of the pipeline and blocks until the input data has been obtained from the data source and all modifiers have been applied to the data. When invoking the compute() method repeatedly without changing the pipeline between calls, it may return immediately with the cached results from an earlier evaluation.

The optional frame parameter determines at which animation time the pipeline is evaluated. Frame numbering starts at 0. If you don’t specify a frame number, the current time slider position is used (will always be frame 0 for scripts not running in the context of an interactive OVITO session).

The compute() method will raise a RuntimeError if the pipeline could not be successfully evaluated for some reason. This can happen due to invalid modifier parameters or file I/O errors, for example.

Parameters: frame (int) – The animation frame number at which the pipeline should be evaluated.
Returns: A DataCollection produced by the data pipeline.

property modifiers¶

The sequence of modifiers in the pipeline.

This list contains any modifiers that are applied to the input data provided by the pipeline’s data source. You can add and remove modifiers as needed using standard Python append() and del operations. The head of the list represents the beginning of the pipeline, i.e. the first modifier receives the data from the data source, manipulates it and passes the results on to the second modifier in the list and so forth.

Example: Adding a new modifier to the end of a data pipeline:

pipeline.modifiers.append(WrapPeriodicImagesModifier())

remove_from_scene()¶: Removes the visual representation of the pipeline from the scene by deleting it from the ovito.Scene.pipelines list. The output data of the pipeline will disappear from the viewports.

property source¶: The object that provides the data entering the pipeline. This typically is a FileSource instance if the pipeline was created by a call to import_file(). You can assign a new source to the pipeline if needed. See the ovito.pipeline module for a list of available pipeline source types. Note that you can even make several pipelines share the same source object.

class ovito.pipeline.PythonScriptSource¶

Example:

from ovito.pipeline import Pipeline, PythonScriptSource
from ovito.io import export_file
from ovito.data import Particles
import numpy

# Define a data source function, which fills an empty DataCollection with
# some data objects.
def create_particles(frame, data):
    data.particles = Particles(count = 20) 
    coordinates = data.particles_.create_property('Position')
    coordinates[:,0] = numpy.linspace(0.0, 50.0, data.particles.count)
    coordinates[:,1] = numpy.cos(coordinates[:,0]/4.0 + frame/5.0)
    coordinates[:,2] = numpy.sin(coordinates[:,0]/4.0 + frame/5.0)

# Create a data pipeline with a PythonScriptSource, which executes our
# script function defined above.
pipeline = Pipeline(source = PythonScriptSource(function = create_particles))

# Export the results of the data pipeline to an output file. 
# The system will invoke the Python function defined above once per animation frame.
export_file(pipeline, 'output/trajectory.xyz', format='xyz',
    columns=['Position.X', 'Position.Y', 'Position.Z'],
    multiple_frames=True, start_frame=0, end_frame=10)

property function¶

The Python function to be called each time the data pipeline is evaluated by the system.

The function must have a signature as shown in the example above. The frame parameter specifies the current animation frame number at which the data pipeline is being evaluated. The DataCollection data is initially empty should be populated with data objects by the user-defined source function.

Default: None

class ovito.pipeline.ReferenceConfigurationModifier¶

Base: ovito.pipeline.Modifier

This is the common base class of analysis modifiers that perform some kind of comparison of the current particle configuration with a reference configuration. For example, the CalculateDisplacementsModifier, the AtomicStrainModifier and the WignerSeitzAnalysisModifier are modifier types that require a reference configuration as additional input.

Constant and sliding reference configurations

The ReferenceConfigurationModifier base class provides various fields that allow you to specify the reference particle configuration. By default, frame 0 of the currently loaded simulation sequence is used as reference. You can select any other frame with the reference_frame field. Sometimes an incremental analysis is desired, instead of a fixed reference configuration. That means the sliding reference configuration and the current configuration are separated along the time axis by a constant period (delta t). The incremental analysis mode is activated by setting the use_frame_offset flag and specifying the desired frame_offset.

External reference configuration file

By default, the reference particle positions are obtained by evaluating the same data pipeline that also provides the current particle positions, i.e. which the modifier is part of. That means any modifiers preceding this modifier in the pipeline will also act upon the reference particle configuration, but not modifiers that follow in the pipeline.

Instead of taking it from the same data pipeline, you can explicitly provide a reference configuration by loading it from a separate data file. To this end the reference field contains a FileSource object and you can use its load() method to load the reference particle positions from a separate file.

Handling of periodic boundary conditions and cell deformations

Certain analysis modifiers such as the CalculateDisplacementsModifier and the AtomicStrainModifier calculate the displacements particles experienced between the reference and the current configuration. Since particle coordinates in periodic simulation cells are often stored in a wrapped form, calculating the displacement vectors is non-trivial when particles have crossed the periodic boundaries. By default, the minimum image convention is used in these cases, but you can turn if off by setting minimum_image_convention to False, for example if the input particle coordinates are given in unwrapped form.

Furthermore, if the simulation cell of the reference and the current configuration are different, it makes a slight difference whether displacements are calculated in the reference or in the current frame. The affine_mapping property controls the type of coordinate mapping that is used.

property affine_mapping¶

Selects the type of affine deformation applied to the particle coordinates of either the reference or the current configuration prior to the actual analysis computation. Must be one of the following modes:

ReferenceConfigurationModifier.AffineMapping.Off
ReferenceConfigurationModifier.AffineMapping.ToReference
ReferenceConfigurationModifier.AffineMapping.ToCurrent

When affine mapping is disabled (AffineMapping.Off), particle displacement vectors are simply calculated from the difference of current and reference positions, irrespective of the cell shape the reference and current configuration. Note that this can introduce a small geometric error if the shape of the periodic simulation cell changes considerably. The mode AffineMapping.ToReference applies an affine transformation to the current configuration such that all particle positions are first mapped to the reference cell before calculating the displacement vectors. The last option, AffineMapping.ToCurrent, does the reverse: it maps the reference particle positions to the deformed cell before calculating the displacements.

Default: ReferenceConfigurationModifier.AffineMapping.Off

property frame_offset¶

The relative frame offset when using a sliding reference configuration (if use_frame_offset == True). Negative frame offsets correspond to reference configurations that precede the current configuration in time.

Default: -1

property minimum_image_convention¶

If False, then displacements are calculated from the particle coordinates in the reference and the current configuration as is. Note that in this case the calculated displacements of particles that have crossed a periodic simulation cell boundary will be wrong if their coordinates are stored in a wrapped form. If True, then the minimum image convention is applied when calculating the displacements of particles that have crossed a periodic boundary.

Default: True

property reference¶

A pipeline source object that provides the reference particle positions. By default this field is None, in which case the modifier obtains the reference particle positions from data pipeline it is part of. You can explicitly assign a data source object such as a FileSource or a StaticSource to this field to specify an explicit reference configuration.

# The modifier that requires a reference config:
mod = CalculateDisplacementsModifier()

# Load the reference config from a separate input file.
mod.reference = FileSource()
mod.reference.load('input/simulation.0.dump')

Default: None

property reference_frame¶

The frame number to use as reference configuration. Ignored if use_frame_offset is set.

Default: 0

property use_frame_offset¶

Determines whether a sliding reference configuration is taken at a constant time offset (specified by frame_offset) relative to the current frame. If False, a constant reference configuration is used (set by the reference_frame parameter) irrespective of the current frame.

Default: False

class ovito.pipeline.StaticSource¶

Serves as a data source for a Pipeline. A StaticSource manages a DataCollection, which it will pass to the Pipeline as input data. One typically initializes a StaticSource with a collection of data objects, then wiring it to a Pipeline as follows:

from ovito.pipeline import StaticSource, Pipeline
from ovito.data import DataCollection, SimulationCell, Particles
from ovito.modifiers import CreateBondsModifier
from ovito.io import export_file

# Insert a new SimulationCell object into a data collection:
data = DataCollection()
cell = SimulationCell(pbc = (False, False, False))
cell[:,0] = (4,0,0)
cell[:,1] = (0,2,0)
cell[:,2] = (0,0,2)
data.objects.append(cell)

# Create a Particles object containing two particles:
particles = Particles()
particles.create_property('Position', data=[[0,0,0],[2,0,0]])
data.objects.append(particles)

# Create a new Pipeline with a StaticSource as data source:
pipeline = Pipeline(source = StaticSource(data = data))

# Apply a modifier:
pipeline.modifiers.append(CreateBondsModifier(cutoff = 3.0))

# Write pipeline results to an output file:
export_file(pipeline, 'output/structure.data', 'lammps/data', atom_style='bond')

compute(frame=None)¶

Returns a copy of the DataCollection stored in this source’s data field.

Parameters: frame – This parameter is ignored, because the data of a StaticSource is not time-dependent.
Returns: A new DataCollection containing the data stored in this StaticSource.

property data¶

The DataCollection managed by this object, which will be fed to the pipeline.

Default: None

ovito.pipeline¶

`ovito.pipeline`¶